Flex-a-Lite Fan Model 310

10-22-04
UPDATED 10-26-04

CLICK ON IMAGES FOR MUCH LARGER IMAGES. 
NOTE EACH PHOTO IS APPROXIMATELY 275kb

AUCTION LISTING ON EBAY
OVERALL OF FAN REAR
NOTE SCUFFING AND
SCRATCHED PAINT
ON ROUND CENTER
PART OF THE MOTORS.
CLOSE UP OF FREE
SPINNING BLADE
CLOSE UP OF BLADE
THAT IS JAMMED
DAMAGED/CRACKED
HOUSING. NOTE
SCUFFING ON THE
HOUSING INDICATING
THAT THE FAN WAS
RUN WHILE IT WAS
BROKEN. THE CRACKED
HOUSING IS CAUSING
THE FAN TO JAMB
(THE FAN WILL NOT
TURN IT HITS THE
HOUSING).  THIS
INDICATES THAT IT
IS NOT A NEW FAN
AND IT WAS RUN /
USED BEFORE SHIPPING
TO ME.
OVERALL OF FRONT
OF FAN UNIT
SCRATCHES AT
MOUNTING LOCATION
INDICATING THAT
IT IS NOT NEW
SCRATCHES AT
MOUNTING LOCATION
INDICATING THAT
IT IS NOT NEW
DAMAGED BOX.  THIS
IS THE END OF THE
 BOX THAT I DID NOT
OPEN. NOTE THAT
 ALL THE OPENINGS
IN THE END WERE
 NOT TAPED.  THIS
IS PROBABLY WHERE
THE MISSING PIECES
FELL OUT.
THIS IS LOOKING
DOWN ON THE FAN.
NOTE THE CURVATURE
 OF THE UNIT. THIS MAY
BE NORMAL I WILL BE
ASKING FLEX-A-LITE
ABOUT THIS.
 

UPDATE------10-26-04
I HAVE SPOKEN
WITH FLEXALITE YESTERDAY
REGARDING THE WEBPAGE
AND WAS TOLD THAT
THIS IS DUE TO THE
FAN BEING "OVERHEATED"
AND USED IN AN APPLICATION
THAT IT WAS NOT DESIGNED
FOR. "MISUSED"  THIS FURTHER
SUPPORTS MY CLAIM THAT
 THIS FAN IS USED. FLEX-A-LITE
 TOLD ME THAT THE FAN
 SHOULD LAY FLAT.
THIS FAN UNIT HAS ABOUT
 A 3/4 INCH SPACE IN THE
CENTER WHEN WHEN LAID FLAT.